IBM EGX-600 Engraver User Manual


 
83
Chapter 5 - The Teaching Feature
5-5. Detailed Information on Saving a Sequence
Backing Up a Sequence
You can back up sequence saved in the machine's built-in memory to a memory card. Back up important data to a
memory card.
Backing Up from the Built-in Memory to a Memory Card
1
Insert a memory card into the machine's
memory-card slot.
2
Press several times to display the screen
shown at right, then move the blinking cursor
to [TEACHING]. Press . Move the blink-
ing cursor to [EDIT], then press .
3
Press to move the blinking cursor to [No].
Press .
4
Turn the dial to select a sequence saved in the
built-in memory. Press .
The sequence editing screen appears.
5
Press and hold for a short while (1 sec-
ond or longer), then press . Turn the dial
to select the memory card as the destination
for saving. Also, assign a file name here.
6
Press .
A backup copy of the sequence is saved on the memory
card.
Select File
Int. TEST
Select File
Ext. new file
Select File
Ext. BACKUP
Edit New File ?
Yes No
I/O OTHERS
TEACHING SELF
RUN DELETE
EDIT SETTING