IBM EGX-600 Engraver User Manual


 
33
Chapter 2 - Basic Operation
2-6. Care and Handling of Memory Cards
Removing a Memory Card
1
Make sure the display shows the top screen.
2
Remove the slot cover.
3
Gently press the card in until it clicks into place,
then pull it out from the memory-card slot.
4
Attach the slot cover.
Do not switch off the power while a memory card is being accessed.
Do not switch off the machine while the display shows a message such as [Now Processing]. Doing so may result in data
corruption or malfunction.
Do not insert or remove a memory card in any of the following circumstances.
After you turn on the machine and before the top screen appears
While the memory card is being accessed (When the display shows a message such as [Now Processing])
While a screen for dating or calling up data is displayed (When the display shows a message such as [Select File])
Doing so may result in data corruption, failure to display the correct file names, or malfunction.
X 0 Y 40700
Z 0 8000RPM
1. 2.