Filter
Top Products
141
Chapter 9 - Appendix
9-6. Specifications
Main Unit Specifications
T slot
Maximum 40 mm (1-9/16 in.)
AC servo motors (DAC-FFP), 3-axis simultaneous control
XY-axis: 0.5, 1 to 100 mm/s (0.02 in./s, 0.039 to 3.9 in./s)
Z-axis: 0.5, 1 to 50 mm/s (0.02 in./s, 0.039 to 1.9 in./s)
0.1 G, 0.05 G
0.01 mm/step (0.00039 in./step)
XY-axis: 0.003 mm/step (0.00012 in./step)
Z-axis: 0.0025 mm/step (0.000098 in./step)
DC brushless motor, Maximum 72 W
8,000 to 30,000 rpm
Cutter holder (4.36 mm) and collet
± 0.1 % of distance traveled or ± 0.1 mm (± 0.004 in.), whichever is greater (no-load operation)
0.05 mm (0.002 in.) or less
LCD panel with backlight
Menu button, ENTER/PAUSE button, Spindle button, X/Y-axis Origin Set button, Z-axis Origin Set button, Move-
ment buttons, Z-axis Movement buttons, Feed button, Copy button, and dial
Parallel connector (Centronics-compliant), serial connector (RS-232C-compliant), Memory card slot (Compliance
with Multi Media Card), expansion connector 1, expansion connector 2
2MB (replot buffer: 1.9MB)
RML-1 (mode 1, mode 2)
AC 117 V, 230 V, 240 V ± 10 %, 50/60 Hz
3.5 A at 117 V, 1.6 A at 230 V, 1.6 A at 240 V
No-load operation: 75 dB (A) or less standby: 45 dB (A) or less (According to ISO 7779)
Temperature: 5 to 40˚C (41 to 104˚F) humidity: 35 to 80 % (no condensation)
Operation panel: 1, Operation-panel connector cable: 1, Power cord: 1, Depth regulator nose unit: 1, Solid collet : 1,
Clamps : 4, Wrench (17 mm: 1, 10 mm: 1), Hexagonal screw driver (2 mm): 1, Hexagonal wrench (3 mm): 1, Roland
Software Package CD-ROM : 1, User's Manual: 1
Table type
Table size
Cutting area
Loadable workpiece thick-
ness
XYZ-axis motor
Feed rate
Acceleration
Software resolution
Mechanical resolution
Spindle motor
Spindle speed
Tool chuck
Positioning Accuracy
Repeatability
Display
Buttons and Controls
Interface
Buffer memory
Instruction system
Power supply
Power consumption
Acoustic noise level
Dimensions (main unit)
Weight (main unit)
Packed dimensions
Packed weight
Operating environment
Accessories
EGX-600
610 (W) x 407 (D) mm (24 (W) x 16 (D) in.)
610 (X) x 407 (Y) x 42.5 (Z) mm
(24 (X) x 16 (Y) x 1-5/8 (Z) in.)
995 (W) x 820 (D) x 521 (H) mm
(39-3/16 (W) x 32-5/16 (D) x 20-1/2 (H) in.)
64 kg (141 lb.)
1370 (W) x 1130 (D) x 835 (H) mm
(54 (W) x 44-1/2 (D) x 33 (H) in.)
100 kg (220 lb.)
EGX-400
407 (W) x 305 (D) mm (16 (W) x 12 (D) in.)
407 (X) x 305 (Y) x 42.5 (Z) mm
(16 (X) x 12 (Y) x 1-5/8 (Z) in.)
795 (W) x 719 (D) x 521 (H) mm
(31-5/16 (W) x 28-5/16 (D) x 20-1/2 (H) in.)
51 kg (112 lb.)
1160 (W) x 1010 (D) x 855 (H) mm
(45-3/4 (W) x 40 (D) x 33-3/4 (H) in.)
83 kg (183 lb.)