Filter
Top Products
120
Chapter 7 - Maintenance
X 0 Y 0
Z 0 8000RPM
7-2. Maintenance and Inspection
Spindle Maintenance
The spindle unit and the belt are consumable components. As a general guide, it should be replaced after every 2,000
hours. As a general guide, the spindle motor should be replaced after every 6,000 hours.
When performing replacement, read the documentation included with the replacement unit or contact your authorized
Roland DG Corp. dealer or Roland DG Corp. service center.
This machine has a feature that lets you view the total working time of the spindle. Refer to this to determine when
replacement is needed.
I/O OTHERS
TEACHING SELF
REVOLUTION
<ON> OFF
REVOLUTION TIME
26 Hours