Filter
Top Products
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC
DRIVE ROLL AND GUIDE TUBE KITS
Table C.2 gives a listing of all of the Drive Roll and
Guide Tube Kits that are available for the DH-10
Dual Head Wire Feeder.
TABLE C.2 — DRIVE ROLL AND GUIDE TUBE KITS.
Wire Size
4-Roll 4-Roll
DH Drive Single Drive
(4-Driven) (2-Driven)
Solid Steel Electrode
0.023 in. - 0.025 in. (0.6 mm) KP1505 - 030S KP655 - 025S
0.030 in. (0.8 mm) KP1505 - 030S KP655 - 030S
0.035 in. (0.9 mm) KP1505 - 035S KP655 - 035S
0.040 in. (1.0 mm) KP1505 - 045S KP655 - 035S
0.045 in. (1.2 mm) KP1505 - 045S KP655 - 052S
0.052 in. (1.4 mm) KP1505 - 052S KP655 - 052S
1/16 in. (1.6 mm) KP1505 - 1/16S KP655 - 1/16
5/64 in. (2.0 mm) KP1505-5/64 KP655 - 3/32
3/32 in. (2.4 mm) KP1505-3/32 ---------------
Cored Electrode
0.030 in. (0.8 mm) KP1505 - 035C ---------------
0.035 in. (0.9 mm) KP1505 - 035C KP655 - 035C
0.040 in. (1.0 mm) KP1505 - 045C KP655 - 035C
0.045 in. (1.2 mm) KP1505 - 045C KP655 - 052C
0.052 in. (1.4 mm) KP1505 - 052C KP655 - 052C
1/16 in. (1.6 mm) KP1505 - 1/16C KP655 - 1/16
0.068 in. (1.7 mm) KP1505 - 068 KP655 - 3/32
5/64 in. (2.0 mm) KP1505 - 5/64 KP655 - 3/32
3/32 in. (2.4 mm) KP1505 - 3/32 ---------------
7/64 in.
Lincore Hard Facing
(2.8 mm) KP1505 - 7/64H ---------------
7/64 in. (2.8 mm) KP1505 - 7/64 ---------------
0.120 in. (3.0 mm) KP1505 - 120 ---------------
Aluminum Electrode
0.035 in. (0.9 mm) KP1507 - 035A KP656 - 035A
0.040 in. (1.0 mm) KP1507 - 040A ---------------
3/64 in. (1.2 mm) KP1507 - 3/64A KP656 - 3/64A
1/16 in. (1.6 mm) KP1507 - 1/16A KP656 - 1/16A
3/32 in. (2.2 mm) KP1507 - 3/32A ---------------
Aluminum Electrode
(For use with Binzel Guns Only)
0.040 in. (1.0 mm) --------------- KP647 - 040A
3/64 in. (1.2 mm) --------------- KP647 - 3/64A
1/16 in. (1.6 mm) --------------- KP647 - 1/16A
C-3
ACCESSORIES
C-3
DH-10