Filter
Top Products
A-2
INSTALLATION
DH-10
A-2
TECHNICAL SPECIFICATIONS – DH-10 Complete Units or Controls & Heads
WIRE DRIVE HEADS (BOOM MOUNT)•
SPEC.# TYPE LOW SPEED RATIO HIGH SPEED RATIO
Wire Size Wire Size
Speed Solid Cored Speed Solid Cored
K1497-1
¤
DH-10 35 - 500 IPM .025 - 3/32 in. .030 - .120 in. 50 - 750 IPM .025 - 1/16 in. .030 - 5/64 in.
Double Head (0.89 - 12.7 m/m) (0.6 - 2.4 mm) (0.8 - 3.0 mm) (1.25 - 19.0 m/m) (0.6 - 1.6 mm) (0.8 - 2.0 mm)
K1497-2◊ DH-10 35 - 500 IPM .025 - 3/32 in. .030 - .120 in. 50 - 750 IPM .025 - 1/16 in. .030 - 5/64 in.
Left Head (0.89 - 12.7 m/m) (0.6 - 2.4 mm) (0.8 - 3.0 mm) (1.25 - 19.0 m/m) (0.6 - 1.6 mm) (0.8 - 2.0 mm)
DH-10 55 - 825 IPM .025 - 1/16 in. .035 - 5/64 in. 80 - 1250 IPM .025 - .045 in. .035 - .045 in.
Right Head (1.40 - 21.0 m/m) (0.6 - 1.6 mm) (0.9 - 2.0 mm) (2.00 - 31.8 m/m) (0.6 - 1.2 mm) (0.9 - 1.2 mm)
K1563-1 LN-10 35 - 500 IPM .025 - 3/32 in. .030 - .120 in. 50 - 750 IPM .025 - 1/16 in. .030 - 5/64 in.
Single Head (0.89 - 12.7 m/m) (0.6 - 2.4 mm) (0.8 - 3.0 mm) (1.25 - 19.0 m/m) (0.6 - 1.6 mm) (0.8 - 2.0 mm)
K1563-2 LN-10 55 - 825 IPM .025 - 1/16 in. .035 - 5/64 in. 80 - 1250 IPM .025 - .045 in. .035 - .045 in.
Single Head (1.40 - 21.0 m/m) (0.6 - 1.6 mm) (0.9 - 2.0 mm) (2.00 - 31.8 m/m) (0.6 - 1.2 mm) (0.9 - 1.2 mm)
K679-1* Synergic 7F 50 - 770 IPM .025 - 1/16 in. .035 - 5/64 in. --- --- ---
Std Drive
Single Head* (1.27 - 19.5 m/m) (0.6 - 1.6 mm) (0.9 - 2.0 mm)
K679-2* Synergic 7F --- --- --- 80 - 1200 IPM .025 - .045 in. .035 - .045 in.
Hi.-Sp. Drive
Single Head* (2.00 - 30.5 m/m) (0.6 - 1.2 mm) (0.9 - 1.2 mm)
CONTROLS SECTION OF COMPLETE UNITS
SPEC.# TYPE INPUT POWER PHYSICAL SIZE• TEMPERATURE RATING
Dimensions
Height Width Depth Weight Operating Storage
K1499-1 Double Head 40 - 42 Vac + 10% 20.50 in. 19.75 in. 31.50 in. 84.5 lbs
Control Bench Model 4.0 Amps 50/60 Hz (520.7 mm) (501.7 mm) (800.1 mm) (38.3 kg) +40°C to +40°C to
-20°C -40°C
K1499-2 Double Head
Control Bench Model
• Excluding Wire Reel - More detailed dimensions and weight information can be found in Section F of this manual.
• Excluding Wire Reel - More detailed dimensions and weight information can be found in Section F of this manual.
CONTROLS (BOOM MOUNT)
SPEC.# TYPE INPUT POWER PHYSICAL SIZE• TEMPERATURE RATING
Dimensions
Height Width Depth Weight Operating Storage
K1496-1∆ DH-10 40 - 42 Vac + 10% 14.80 in. 14.20 in. 4.20 in. 18.0 lbs +40°C to +40°C to
Control Controls 4.0 Amps 50/60 Hz (375.9 mm) ( 360.7mm) (106.7 mm) (8.2 kg) -20°C -40°C
• Excluding Wire Reel - More detailed dimensions and weight information can be found in Section F of this manual.
∆ Included with all K1521-[ ] DH-10 Standard and Zipline Boom Packages
The K1496-1 DH-10 control can be used with any of the following Wire Drive Heads
• Excluding Wire Reel - More detailed dimensions and weight information can be found in Section F of this manual.
¤ Included in K1521-1,-2,-3 DH-10 Boom Packages.
◊ Included in K1521-4,-5,-6 DH-10 Boom Packages.
*Single head drives use 4-roll drives with 2 driven rolls (Drive roll kits not common with -10 Series drives)
The K1499-1 or -2 DH-10 consists of a control and a double head 10 series wire drive assembly pre-
mounted on a platform with two 2 in. O.D. spindle mountings. Specifications for the units follow:
The various components of the DH-10 system are available separately or in kits for mounting on boom
assemblies. The description of the various components follow:
WIRE DRIVE SPECIFICATIONS FOR COMPLETE UNITS•
SPEC.# TYPE LOW SPEED RATIO HIGH SPEED RATIO
Wire Size Wire Size
Speed Solid Cored Speed Solid Cored
K1499-1 DH-10 35 - 500 IPM .025 - 3/32 in. .030 - .120 in. 50 - 750 IPM .025 - 1/16 in. .030 - 5/64 in.
Double Head (0.89 - 12.7 m/m) (0.6 - 2.4 mm) (0.8 - 3.0 mm) (1.25 - 19.0 m/m) (0.6 - 1.6 mm) (0.8 - 2.0 mm)
K1499-2 DH-10 35 - 500 IPM .025 - 3/32 in. .030 - .120 in. 50 - 750 IPM .025 - 1/16 in. .030 - 5/64 in.
Left Head (0.89 - 12.7 m/m) (0.6 - 2.4 mm) (0.8 - 3.0 mm) (1.25 - 19.0 m/m) (0.6 - 1.6 mm) (0.8 - 2.0 mm)
DH-10 55 - 825 IPM .025 - 1/16 in. .035 - 5/64 in. 80 - 1250 IPM .025 - .045 in. .035 - .045 in.
Right Head (1.40 - 21.0 m/m) (0.6 - 1.6 mm) (0.9 - 2.0 mm) (2.00 - 31.8 m/m) (0.6 - 1.2 mm) (0.9 - 1.2 mm)
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC