Filter
Top Products
OPTIONS/ACCESSORIES
The following options/accessories are available for
your RANGER 9 from your local Lincoln Distributor.
Two-Wheel Trailer (K768-2) – For in-plant or yard
towing of the RANGER 9. (Not intended for highway
towing as equipped. For highway use of this trailer,
consult applicable federal, state, and local laws about
possible requirements for brakes, lights, fenders, etc.
Two-Wheel Undercarriage (K889-2) – For moving the
RANGER 9 by hand. Overall width is 29 inches
(74 mm).
Caster for Undercarriage (K893-1) – Mounts to the
front of the K889-2 to allow easy movement on
smooth surfaces. Includes a 6 inch (152.4 mm) diam-
eter hard rubber wheel and convenient toe-on, toe-off
locking brake.
Four-Wheel Undercarriage (K933-1) – Allows move-
ment of the RANGER 9 by hand without lifting. Easily
assembles to RANGER 9. Includes two rugged, hard
molded wheels and two durable pneumatic tires. The
spring loaded handle provides convenient, comfort-
able steering. The K934-1 Bracket is available for
mounting a gas cylinder on the undercarriage.
Bracket for Mounting a Gas Cylinder to a K933-1
Undercarriage (K934-1) – Easily mounts on the back
of the K933-1 Four Wheel Undercarriage to carry a
welding gas cylinder.
Canvas Cover (K886-1) – For protecting the
RANGER 9 when it’s not in use. Material is flame retar-
dant, mildew resistant, and water repellent. Color: red.
Power Plug Kit (K802-N) – Provides four 20 amp, 115
volt plugs and one 50 amp, dual voltage (115/230V),
full kVA plug. NOTE: For CSA machines K1418-2 or
K1419-2 and machines with GFCI receptacles, use
Power Plug Kit K802-R.)
Power Plug Kit (K802-R) –Provides four 15 amp, 115
volt plugs and one 50 amp, dual voltage (115/230V),
full kVA plug.
Accessory Kit (K702) – Includes the following:
• Thirty-five feet (10.5 meters) of #2 AWG electrode
cable
• Thirty feet (9.1 meters) of #2 AWG work cable
• Headshield with No. 12 filter.
• GC300 work clamp
• Cooltong
®
300 insulated electrode holder
The cables are rated at 250 amps, 40% duty cycle.
Spark Arrester Kit (K894-1) – A field-installed kit for
the RANGER 9 gasoline engine muffler exhaust pipe
(either engine option). Includes a heavy-gauge steel,
approved spark arrester and mounting clamp.
Rotor Removal Kit (S20788) – A service kit with thru
and impact bolts for removing the generator rotor from
the tapered engine crankshaft.
Remote Control (K857) – Includes a control box with
25 feet (7.5 meters) of 4-conductor cable. Allows out-
put voltage to be controlled remotely.
GFCI Receptacle Kit (K896-1) – Includes two UL
approved 115 volt ground fault circuit interrupter
receptacles (duplex type) with covers and installation
instructions. Each receptacle is rated 15 amps, but
the maximum total current from each GFCI duplex is
limited to 20 amps. The GFCI receptacles replace the
two factory installed 115 volt duplex receptacles.
ACCESSORIES
C-2 C-2
RANGER 9 RANGER 9
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC