Filter
Top Products
TIG WELDING
TIG Module (K930-1) - The TIG Module is an acces-
sory that provides high frequency and shielding gas
control for AC and DC GTAW (TIG) welding applica-
tions. It provides contactor control of constant current
welding power sources having an internal contactor.
The K930-1 TIG Module is supplied without accessories.
Arc Start switches, Amptrols, cables, torches and
mounting brackets must be purchased separately.
Docking Kit (K939-1) - For mounting the K930-1 TIG
Module on top of the RANGER 9.
Control Cable (K936-1) - Control cable for connecting
the K930-1 TIG Module to a RANGER 9 9-Socket (at
the TIG Module) to 14-pin (at RANGER 9). (Contains
circuits 2, 4, 31, 32, 75, 76, 77 and ground.)
Arc Start Switch (K814) - A remote start switch used
in conjunction with the K930-1 TIG Module to energize
the output terminals via the TIG Module.
K812 – Hand Amptrol.
K870 – Foot Amptrol.
NOTE: TIG welding requires a Magnum™ TIG Gun,
appropriate Magnum Parts Kit and argon gas.
SEMIAUTOMATIC FCAW AND MIG WELDING
LN-25 Wire Feeder K449 – This portable unit provides
CC/CV for flux-cored arc welding (FCAW) and metal
inert gas welding (MIG). Includes a gas solenoid and
an internal contactor that allows across-the-arc oper-
ation with no control cable. The LN-25 provides a
“cold” electrode until the gun trigger is pressed. For
voltage control at the feeder, a K444-1 Remote Voltage
Control Kit is required. Refer to connection instruc-
tions later in this section.
LN-7 or LN-8 Wire Feeder – Semiautomatic, con-
stant speed wire feeders.
NOTE: Gas-shielded welding requires a Magnum
Gun. Gasless welding requires an Innershield Gun.
LN-742 Wire Feeder – A semiautomatic wire feeder
with “cold” electrode. Requires K589-1 Remote
Control Kit for remote voltage and wire speed control.
K857 Remote Voltage Control Kit connects to the
RANGER 9 for voltage control at the feeder. Refer to
connection instructions later in this section.
Magnum Spool Gun (K487-25) – A lightweight, semi-
automatic wire feeder for aluminum welding with
argon gas. Has built-in remote wire speed control in
the handle. Requires the K488 SG Control Module.
Includes 50 feet (15.2 meters) of power cable.
SG Control Module (K488) – Controls wire speed and
gas flow. Provides the required control interface
between the RANGER 9 and the K487-25 Magnum
Spool Gun.
ACCESSORIES
C-3 C-3
RANGER 9 RANGER 9
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC