Filter
Top Products
5 - 3
MDS-D-SVJ3/SPJ3 Series Specifications Manual
5-1 Servo options
(b) Full closed loop control for rotary axis
<Contact information about machine side detector>
- Magnescale Co., Ltd: http://www.mgscale.com/mgs/
- HEIDENHAIN CORPORATION: http://www.heidenhain.de/
- Mitutoyo Corporation: http://www.mitutoyo.co.jp/
- MHI MACHINE TOOL ENGINEERING CO., LTD: http://www.mme-e.co.jp/
- FAGOR Automation: http://www.fagorautomation.com/
(2) System establishment in the synchronous control
(a) Position command synchronous control
The synchronous control is all executed in the NC, and the each servo is controlled as an independent
axis. Therefore, preparing special options for the synchronous control is not required on the servo side.
Machine side detector to be used
Detector signal
output
Interface unit
Output
signal
Battery
option
Remarks
Incre-
mental
detector
Rectangular
wave signal
output
Various scale
Rectangular wave
signal
-
Rectangular
wave signal
-
SIN wave
signal
output
ERM280 Series
(HEIDENHAIN)
SIN wave signal
EIB series
(HEIDENHAIN)
Mitsubishi
serial signal
-
Various scale SIN wave signal
MDS-B-HR-11(P)
(MITSUBISHI ELECTRIC)
Mitsubishi
serial signal
-
Abso-
lute
position
detector
Mitsubishi
serial signal
output
RU77
(MAGNESCALE)
Mitsubishi serial
signal
-
Mitsubishi
serial signal
Not required
RCN223M, RCN227M
(HEIDENHAIN)
Mitsubishi serial
signal
-
Mitsubishi
serial signal
Not required
RCN727M, RCN827M
(HEIDENHAIN)
Mitsubishi serial
signal
-
Mitsubishi
serial signal
Not required
SIN wave
signal
output
MPRZ Series
(MME Corp.)
SIN wave signal
ADB-20J71
(MME Corp.)
Mitsubishi
serial signal
Not required
MPI Series
(MME Corp.)
SIN wave signal
ADB-20J60
(MME Corp.)
Mitsubishi
serial signal
Required
The absolute position system cannot be established in combination with the relative position
(incremental) machine side detector and absolute position motor side detector.
When executing the synchronous control, use the servomotors of which the type and detector
specifications are same.
POINT
POINT