Mitsubishi Electronics MDS-D-SVJ3 Engraver User Manual


 
5 - 14
5 Dedicated Options
MITSUBISHI CNC
(2) Absolute position detector
The applicable absolute position detectors are as follows.
<Contact information about machine side detector>
- Magnescale Co., Ltd: http://www.mgscale.com/mgs/
- HEIDENHAIN CORPORATION: http://www.heidenhain.de/
- Mitutoyo Corporation: http://www.mitutoyo.co.jp/
- MHI MACHINE TOOL ENGINEERING CO., LTD: http://www.mme-e.co.jp/
- FAGOR Automation: http://www.fagorautomation.com/
Manufacturer Detector type Interface unit type Minimum detection resolution
Tolerable maximum
speed
Magnescale Co., Ltd
SR77
SR87
Not required
0.1μm
200m/min0.05μm
0.01μm
RU77 Not required
0.0000429°
(8,388,608p/rev)
2,000r/min
0.0000107
(33,554,432p/rev)
2,000r/min
HEIDENHAIN
MitutoyoAT343Not
required0.05μm120m/min
LC193M
LC493M
Not required
0.05μm
180m/min
0.01μm
RCN223M Not required
0.0000429°
(8,388,608p/rev)
1,500r/min
RCN227M Not required
0.0000027°
(134,217,728p/rev)
1,500r/min
RCN727M
RCN827M
Not required
0.0000027°
(134,217,728p/rev)
300r/min
Mitutoyo
AT343 Not required 0.05μm 120m/min
AT543 Not required 0.05μm 150m/min
AT545 Not required
0.00488
(20/4096)μm
150m/min
MHI MACHINE TOOL
ENGINEERING CO., LTD
MPRZ series ADB-20J71
0.000043°
(8,388,608p/rev)
10,000r/min
MPS Series ADB-20J60 0.05μm 3600m/min
MPI Series ADB-20J60
0.00005°(7,200,000p/rev)
or 0.000025°(14,400,000p/rev)
5,000r/min
FAGOR
SAM Series Not required 0.05μm 120m/min
SVAM Series Not required 0.05μm 120m/min
GAM Series Not required 0.05μm 120m/min
LAM Series Not required 0.1μm 120m/min
Confirm specifications of each detector manufacturer before using the machine side detector.
CAUTION