Mitsubishi Electronics MDS-D-SVJ3 Engraver User Manual


 
5 - 31
MDS-D-SVJ3/SPJ3 Series Specifications Manual
5-4 Drive unit option
DC24V output (DCOUT)
<PCB side connector type>
Connector: 3-178137-5
Recommended manufacturer: Tyco Electronics
<Cable side connector type>
Connector: 2-178127-6
Contact: 1-175218-5
Recommended manufacturer: Tyco Electronics
Power OFF input ACFAIL (Terminal name:CF01)
<PCB side connector type>
Connector: 53103-0230
Recommended manufacturer: MOLEX
<Cable side connector type>
connector: 51030-0230
Contact: 50084-8160
Recommended manufacturer: MOLEX
FG terminal (FG)
<Cable side faston terminal type name>
Type name: 175022-1(For AWG20-14 250 series)
Recommended manufacturer: Tyco Electronics
Terminal protection tube: 174817-2 (Yellow)
Unit side tab terminal shape
(Note) The faston terminal "175022-1" of the cable side is a simple lock type. Make sure to insert
until the simple lock pin is in the Φsecond hole. Firmly press the simple lock release tab
when unplugging it.
A3A1
B3B1
21
FG
Φ2.0
5.0
6.2
0.9
0.80.025
9.6