Filter
Top Products
RangeMax Wireless-N DSL Gigabit Modem Router DGN3500 User Manual
Technical Specifications A-2
v1.0, November 2009
Factory Default Configuration
You can use the Restore Factory Settings button on the rear panel of the modem router to return its
configuration to the factory settings. This is called a hard reset. To perform a hard reset, press and
hold the Restore Factory Settings button until the LEDs flash. Your modem router retarts and
returns to the factory configuration settings shown in the following table.
Interface Specifications
LAN 10BASE-T or 100BASE-Tx, RJ-45
WAN ADSL, Dual RJ-11, pins 2 and 3
T1.413, G.DMT, G.Lite
USB ?
Feature Default Behavior
Login
Modem Router user login URL http://www.routerlongin.com
User name (case-sensitive) admin
Login password (case-sensitive) password
ReadyShare Access \\readyshare
Internet Connection
WAN MAC address Use default address
WAN MTU size 1500
Port speed Autosensing
Local Network (LAN)
LAN IP 192.168.0.1
Subnet mask 255.255.255.0
RIP direction None
RIP version Disabled
RIP authentication None
DHCP server Enabled
DHCP starting IP address 192.168.0.2
Specification Description