Filter
Top Products
RangeMax Wireless-N DSL Gigabit Modem Router DGN3500 User Manual
1-3 Connecting Your Router to the Internet
v1.0, November 2009
• Checking for Firmware Updates screen. After initial configuration, this screen displays
unless you previously cleared the Check for Updated Firmware Upon Log-in check box.
If the modem router discovers a newer version of the firmware, you are asked if you want to
upgrade to the new firmware (see “Upgrading the Firmware” on page 4-1 for details). If no
new firmware is available, the following message displays.
• Router Status screen. The Router Status screen displays if the modem router has not been
configured yet or has been reset to its factory default settings. See “Viewing Modem Router
Status Information” on page 4-4.
You can use the Setup Wizard to automatically detect your Internet connection as described in
“Using the Setup Wizard” on page 1-4, or you can bypass the Setup Wizard and manually
configure your Internet connection as described in “Viewing or Manually Configuring Your
ISP Settings” on page 1-4.
Figure 1-2
Note: If the modem router is not configured (is in its factory default state) when you
log in, the Setup Wizard displays. See “Using the Setup Wizard” on page 1-4.
Figure 1-3