Filter
Top Products
RangeMax Wireless-N DSL Gigabit Modem Router DGN3500 User Manual
4-8 Managing Your Network
v1.0, November 2009
• To change the polling frequency, enter a time in seconds in the Poll Interval field, and click
Set Interval.
• To stop the polling, click Stop.
Viewing a List of Attached Devices
The Attached Devices table lists all IP devices that the modem router has discovered on the local
network. From the main menu, under Maintenance, select Attached Devices to view the table.
For each device, the table shows the IP address, NetBIOS host name or device name (if available),
and the Ethernet MAC address. To force the modem router to look for attached devices, click
Refresh.
Status The link status of the port.
TxPkts The number of packets transmitted on this port since reset or manual clear.
RxPkts The number of packets received on this port since reset or manual clear.
Collisions The number of collisions on this port since reset or manual clear.
Tx B/s The current transmission (outbound) bandwidth used on the WAN and LAN ports.
Rx B/s The current reception (inbound) bandwidth used on the WAN and LAN ports.
Up Time The time elapsed since this port acquired the link.
Poll Interval The intervals at which the statistics are updated in this screen.
Figure 4-7
Note: If the router is rebooted, the table data is lost until the modem router rediscovers
the devices.
Table 4-3. Wireless Modem Router Statistics (continued)
Item Description