NETGEAR DGN3500-100NAS Router User Manual


 
RangeMax Wireless-N DSL Gigabit Modem Router DGN3500 User Manual
Advanced Configuration 5-17
v1.0, November 2009
3. To save, cancel your changes, or refresh the table:
Click Apply to save the new settings to the modem router.
Click Cancel to disregard any unsaved changes.
Click Refresh to update the portmap table and to show the active ports that are currently
opened by UPnP devices.
Building Wireless Bridging and Repeating Networks
With the DGN3500 modem router, you can build large bridged wireless networks that form an
IEEE 802.11n Wireless Distribution System (WDS). Using the modem router with other access
points (APs) and wireless devices, you can connect clients by using their MAC addresses rather
than by specifying IP addresses.
Here are some examples of wireless bridged configurations:
Point-to-point bridge. The modem router communicates with another bridge-mode wireless
station. See “Configuring a Point-to-Point Bridge Configuration.”
Multi-point bridge. The modem router is the “master” for a group of bridge-mode wireless
stations. Then all traffic is sent to this master, rather than to other access points. See
“Configuring a Repeater with Wireless Client Association.”
Repeater with wireless client association. Sends all traffic to the remote access point. See
“Configuring a Repeater with Wireless Client Association.”
Note: The wireless bridging and repeating feature uses the default security profile to send
and receive traffic.