Filter
Top Products
1-1
v1.0, November 2009
Chapter 1
Connecting Your Router to the Internet
This chapter describes how to configure your Wireless-N Modem Router Internet connection.
When you install your modem router using the Resource CD as described in the Setup Manual,
these settings are configured automatically for you. This chapter provides instructions on how to
log in to the modem router for further configuration.
This chapter includes:
• “Using the Setup Manual
• “Logging In to Your Wireless Modem Router” on page 1-2
• “Using the Setup Wizard” on page 1-4
• “Viewing or Manually Configuring Your ISP Settings” on page 1-4
• “Configuring ADSL Settings” on page 1-8
Using the Setup Manual
For first-time installation of your wireless modem router, refer to the Setup Manual. The Setup
Manual explains how to launch the NETGEAR Smart Wizard on the Resource CD to step you
through the procedure to connect your modem router and computers. The Smart Wizard will assist
you in configuring your wireless settings and enabling wireless security for your network. After
initial configuration using the Setup Manual, you can use the information in this Reference
Manual to configure additional features of your wireless modem router.
For installation instructions in a language other than English, see the language options on the
Resource CD.
Note: NETGEAR recommends that Windows OS users use the Smart Wizard™ on the
Resource CD for initial configuration
. Mac and Linux OS users should access the
Setup Manual on the Resource CD.