Filter
Top Products
RangeMax Wireless-N DSL Gigabit Modem Router DGN3500 User Manual
5-20 Advanced Configuration
v1.0, November 2009
• You do not have the option of disabling client associations with this DGN3500 modem router.
• You cannot configure a sequence of parent/child APs. You are limited to only one parent AP,
although if the DGN3500 modem router is the parent AP, it can connect with up to four child
APs.
The following figure shows an example of a Repeater mode configuration.
To set up a repeater with wireless client association:
1. Configure the operating mode of the devices.
• Configure AP 1 (the DGN3500 modem router in Figure 5-11) on with the MAC address of
AP 2 and AP 3 in the first two Remote MAC Address fields.
• Configure AP 2 with the MAC address of AP 1 in the Remote MAC Address field.
• Configure AP 3 with the MAC address of AP 1 in the Remote MAC Address field.
2. Verify the following for both access points:
• The LAN network configuration of each AP is configured to operate in the same LAN
network address range as the LAN devices.
• The APs must be on the same LAN. That is, the LAN IP addresses for the APs must be in
the same network.
Figure 5-11
Internet
PCs
Wireless PC
192.168.0.1
AP 1 (parent AP in repeater mode)
AP 3 in repeater mode
Wireless PC
associated
with AP 3
AP 2 in repeater mode
associated
with AP2
Wireless PC
with AP 1
associated
DGN3500 modem router