Filter
Top Products
19
GM 3000AC
"?
OPERATING MANUAL
EDITION 05/2007
PART NO. DOC364831
4.5.2 AIRCOAT ROUND JET PROCESS
In the AirCoat process, high pressure of 3-12 MPa; 30-120 bar; 435-1740 psi is used to atom-
ize the material.
The AirCoat air at 0.05-0.25 MPa; 0.5-2.5 bar; 7.2-36 psi produces a soft jet, which largely
eliminates the problem of overlapping boundaries.
The spray jet can be adjusted by turning the nozzle nut. The multi-channel swirl nozzle
produces fi ne paint particles, while at the same time reducing their forwards speed and
swirling them to produce a rotating motion. The result is a soft, extremely well atomized
spraying cloud.
Spray jet
Multi-channel swirl nozzle
Nozzle nut
AirCoat-air
AirCoat-air
Material
Advantages
•
High painting capacity
•
Low fogging tendency
•
Good fi nish
•
High- viscosity paints can easily be applied