Filter
Top Products
37
GM 3000AC
SW 19 mm; 0.75 inch
A
B_00067
SW 17 mm;
0.70 inch
C
B
OPERATING MANUAL
EDITION 05/2007
PART NO. DOC364831
6.7 CHANGING OR CLEANING EDGE FILTER (OPTIONAL)
1. Put out of operation and clean.
2. Relieve the pressure from the gun and unit.
3. Secure gun with trigger safety catch.
4. Place open-ended wrench 19 mm; 0.75 inch respectively 17 mm; 0.70 inch on fl ats of
fi lter housing (B) respectively swivel (C) and counterhold.
5. Turn nut to the right with open-ended wrench 17 mm; 0.70 inch and unscrew pivot
joint (C) with material hose.
6. Remove edge fi lter (A)
7. Clean the fi lter housing (B) respectively swivel (C) and edge fi lter (A) with cleaning
agent.
8. Assembly:
Fit the cleaned or new edge fi lter into the pivot joint (C).
9. Fit pivot joint with the material hose by hand and tighten with 2 open-ended wrenches
17 mm; 0.70 inch / 19 mm; 0.748 inch.
Counterpressure