Filter
Top Products
32
GM 3000AC
SW 19 mm; 0.75 inch
SW 17 mm; 0.70 in
c
B_00059
SW 13 mm; 0.51 inch
SW 19 mm; 0.75 inch
"?
B_00036
OPERATING MANUAL
EDITION 05/2007
PART NO. DOC364831
6.3 CHANGING MATERIAL HOSE
1. Put out of operation and clean.
2. Relieve the pressure from the gun and unit.
3. Secure gun with trigger safety catch.
4. Place open-ended wrench 13 mm; 0.51 inch respectively 17 mm; 0.70 inch on fl ats of paint
connection respectively swivel and counterhold.
5. Turn nut to the right with open-ended wrench 19 mm; 0.75 inch and unscrew material hose.
6. Assembly:
Fit the material hose by hand and tighten with 2 open-ended wrenches
13 mm; 0.51 inch; 19 mm; 0.75 inch respectively 17 mm; 0.70 inch; 19 mm; 0.75 inch
Counterpressure
Counterpressure
Note:
Do not unscrew the paint connection. The nut must only be unscrewed by WAGNER- Ser-
vice-Agency.