Filter
Top Products
36
GM 3000AC
1.
2.
4.
5.
A
B
C
B_00066
3.
F
OPERATING MANUAL
EDITION 05/2007
PART NO. DOC364831
6.6 REPLACING SEAL (DISTRIBUTOR)
1. Take out of operation and clean.
2. Relieve the pressure from the gun and unit.
3. Secure gun with trigger safety catch.
4. Unscrew aircap nut with nozzle guard (A)
5. Remove air cap (B) and nozzle (C).
6. Pull the damaged seal (F) out using a pliers
7. Assembly: Put the new seal (F) on the air cap (B).
8. Place the air cap and seal into gun housing.
9. Set aircap nut (A) and screw in as far as the seal ring (F) in the groove catches. (snap
hearable)
10. Disassemble aircap nut and aircap an complete the spray gun. See chapter 5.4.3.