Filter
Top Products
7
GM 3000AC
OPERATING MANUAL
EDITION 05/2007
PART NO. DOC364831
2.2.2 EARTH THE UNIT
2.2.3 MATERIAL HOSES
2.2.1 SAFE HANDLING OF WAGNER SPRAY UNITS
The spray jet is under pressure and can cause dangerous injuries.
Avoid injection of paint or cleaning agents:
Never point the spray gun at people.
Never reach into the spray jet.
Before all work on the unit, in the event of work interruptions and functional
faults:
– Switch off the energy/compressed air supply.
– Secure the spray gun against actuation.
– Relieve the pressure from the spray gun and unit.
– By functional faults: Identify and correct the problem, proceed as described in
chap. „Trouble shooting“.
In the event of skin injuries caused by paint or cleaning agents:
Note down the paint or cleaning agent that you have been using.
Consult a doctor immediately.
Avoid danger of injury through recoil forces:
Ensure that you have a firm footing when operating the spray gun.
Only hold the spray gun briefly in any one position.
%LECTROSTATICCHARGESCANOCCURONTHEUNITDUETOTHEELECTROSTATICCHARGEANDTHEmOW
SPEEDINVOLVEDINSPRAYING4HESECANCAUSESPARKSANDmAMESUPONDISCHARGE
%NSURETHATTHEUNITISEARTHEDFOREVERYSPRAYINGOPERATION
%ARTHTHEWORKPIECESTOBECOATED
%NSURETHATALLPERSONSINSIDETHEWORKINGAREAAREEARTHEDEGTHATTHEYAREWEARING
ANTISTATICSHOES
7HENSPRAYINGWEARANTISTATICGLOVESTOEARTHYOURSELFVIATHESPRAYGUNHANDLE
%NSURETHATTHEHOSEMATERIALISCHEMICALLYRESISTANTTOTHESPRAYEDMATERIALS
%NSURETHATTHEMATERIALHOSEISSUITABLEFORTHEPRESSUREGENERATEDINTHEUNIT
%NSURETHATTHEFOLLOWINGINFORMATIONISVISIBLEONTHEHIGHPRESSUREHOSE
n-ANUFACTURER
n0ERMISSIBLEOPERATINGOVERPRESSURE
n$ATEOFMANUFACTURE
4HEELECTRICALRESISTANCEOFTHECOMPLETEHIGHPRESSUREHOSEMUSTBELESSTHAN
-/HM