Filter
Top Products
31
GM 3000AC
"?
X
"?
!
#
"
37MM
IN
37MMIN
"?
OPERATING MANUAL
EDITION 05/2007
PART NO. DOC364831
6.2 CHANGING OR CLEANING FILTER
1. Take spraygun out of operation and clean.
2. Relieve the pressure from the gun and unit.
3. Secure gun with trigger safety catch.
4. Unscrew the complete swivel assembly with the fi lter housing, and remove downwards
with the hose.
5. Remove the fi lter insert (A) from the fi lter housing (B).
6. Clean the swivel, fi lter housing and fi lter (A) with cleaning agent.
7. Fit the cleaned or new fi lter insert (A) into the fi lter housing with the conical end (X)
pointing upwards.
8. Push the fi lter housing over the swivel hexagon, then slide the whole assembly over
the gun fi lter and tighten by hand.
Unscrew
Tighten
Counter
Note:
In case of diffi culty unsrewing the fi lter
housing use 2 open-ended wrenches
(13 mm; 0.512 inch / 17 mm; 0.70 inch)
Note:
Do not unscrew the paint connection. The nut must only be unscrewed by
WAGNER- Service-Agency.
Unscrew