Wagner SprayTech GM300AC Paint Sprayer User Manual


  Open as PDF
of 64
 
44
GM 3000AC
"?
OPERATING MANUAL
EDITION 05/2007
PART NO. DOC364831
Disassembly
1. Unscrew the fi lter housing (1) from the connection piece and remove the edge fi lter
(6) and nipple (5).
2. Unscrew adjuster screw (2). Remove o-ring (3) and gasket (4).
Item K Qty Part-No. Description
1 1 0364379 Filter housing M16x1.5 LW
1 1 0364380 Filter housing NPS1/4“-18 LW
2 1 0364374 Adjuster screw
3 1 9971147 O-ring
4 1 0364375 Gasket
5 1 0179456 Nipple for M16x1.5
5 1 0179457 Nipple for NPS1/4“-18
6 1 3204605 Edge fi lter 100 meshes
7 1 0364925 Pivot joint paint LW M16x1.5 fi lter
7 1 0364926 Pivot joint paint LW NPS1/4“-18 fi lter
8 1 9992528 Loctite 270
9 1 9992695 Castor oil
10 1 9992698 Vaseline white PHHV II
Note:
All reusable parts should be cleaned thoroughly using a suitable solvent.
7!2.).'
$EFECTIVEPARTS
,EAKAGECAUSEDBYDEFECTIVEPARTS
4HERESULTINGSPRAYJETCANINJECTMATERIALINTOTHEBODYSKINEYES
ETC
 !LWAYSREPLACEDEFECTIVEPARTS/RINGSANDSEALSETS
 %NSURETHATADHESIONPOINTSARECLEANANDFREEOFGREASE
3)()??'"
8.3 PIVOT JOINT PAINT LW
 previous next