Filter
Top Products
20
GM 3000AC
!
"
#
$
%
&
'
(
)
*
+
,
-
"?
OPERATING MANUAL
EDITION 05/2007
PART NO. DOC364831
5 PREPARATION BEFORE STARTING WORK
5.1.1 TYPICAL AIRCOAT INSTALLATION
A Paint-pump
B Air shut-off valve
C Air regulator
D Air regulator with fi lter
E Earthing cable
F Air hose (electrically conductive)
G AirCoat spray gun
H HP-fl uid hose
I HP-fi lter/ relief valve
J Relief tube
K Stand Trolley
L Suction system
M Mains air inlet
The spray gun GM 3000AC must be used a
part of an AirCoat spraying system. The Air-
Coat system shown in the fi gure is only one
example of an AirCoat spraying system. Con-
tact your WAGNER distributor for assistance
in designing a system to meet your needs.
The operating instructions and the safety re
gulations for the additional system compo-
nents used must be read before starting-up
5.1 SET UP AND CONNECT
WARNING
Incorrect installation/operation!
Risk of injury and damage to equipment
When putting into operation and for all work, read and follow
the operating instructions and safety regulations for the addi-
tionally required system components.
SIHI_0050_GB