Filter
Top Products
27
GM 3000AC
"?
X
A
B
C
D
B_00042
OPERATING MANUAL
EDITION 05/2007
PART NO. DOC364831
5.4.3 CHANGING AIRCOAT NOZZLE
1. Relieve the pressure from the gun and unit.
2. Secure gun with trigger safety catch.
3. Unscrew aircap nut (A)
4. Remove air cap (B) and nozzle (C).
5. Press AirCoat nozzle (C) out of the air cap by hand and brush with cleaning solvent
until all remaining paint has been dissolved.
6. Assembly:
Place AirCoat nozzle (C) in nozzle seal (D).
7. Place air cap (B) on the nozzle (C). Take care that the nozzle fi tted is correctly (see fl ats
X)
8. Fit the aircap nut with nozzle guard (A) over the air cap (B) onto the spray gun and
tighten by hand.
CAUTION
Defective AirCoat nozzle!
Insufficient paint application quality
Do not use sharp-edged objects to treat hard metal on the AirCoat nozzle.
SIHI_0020_GB
CAUTION
Defective nozzle seal!
Material sprays into the air cap next to the nozzle
Risk of contamination
Do not clean the nozzle seal with sharp-edged objects.
Replace the nozzle seal if the sealing surface is damaged.
SIHI_0021_GB