DSM250 User’s Manual
Page 234 Revision 1.4.16a
Figure 275 – Editing an Alert
This brings up the list of Alerts managed by the DSM2590.
Figure 276 – Editing an Alert: Alert List
The following information is shown for each alert that is in the system.
Priority – The priority of the Alert (see 8.3.3).
Enab. – Whether the Alert is Enabled or Disabled.
Type – The Type of Alert. This is a combination of whether the Alert is Local or Global (0) and
whether the Alert is an Alarm or a Warning (8.3.2)
Description – The textual description of the Alert (8.3.5)
Scroll up and down using the Scroll Up and Scroll Down buttons until the alert that must be edited is
highlighted, and press the Enter button.
The Alert Editor is opened, pre-populated with the parameters of the chosen Alert. See section 8.1 for
details of these parameters.
