Revision 1.4.16a Page 35
Figure 22 – Setting the Keyboard Beep Option
5.2.4.7 Label
Each DSM250 can be given a software label. Normally this label will indicate the position of the
DSM250 and is used by the Alert System to identify one DSM250 from another.
Figure 23 – Editing the DSM250 Label
5.2.4.8 Language
The DSM250 currently supports two languages: Englis
h and Dutch (Nederlands). Support for other
languages is planned for future firmware releases. To change the currently used language, use the
Scroll Up ( ) or Scroll Down ( ) keys to move the highlight to the “Language:” menu item, and
then press the Enter key ( ) to move the highlight to the language selection on the right. Use the
Scroll Up ( ) or Scroll Down ( ) keys to change the selection to the desired value, and then
press the Enter key ( ) to confirm your selection. The DSM250 will then reset itself, after which the
selected language will be used for menus and titles.
5.2.4.9 Software Version
This field displays the version of the Firmware running in the DSM250.
