Revision 1.4.16a Page 33
Figure 19 – Color Palette Selection Screen
Use the Scroll Up ( ) or Scroll Down ( ) keys to move the highlight to the color set that you want
to change, and then press the Enter key ( ). Selecting “Color Set #1” takes you to the screen
shown in Figure 20.
Figure 20 – Color Palette Configuration Screen
You can enable or disable Color Set #1 by changing the “Color Set:” to “Off”. This will disable Color
Set #1 while changing between color palettes when using a long press of the Lights key ( ) when
the DSM250 is operating in favorite screens mode. Change the “Color Set:” back to “On” to enable
this color palette.
Notice that Color Set #1 has a white background (100% Red, 100% Green, and 100% Blue equals
white) and that the foreground color is black. You can adjust the three different colors to achieve
different color backgrounds. Use the Scroll Up ( ) or Scroll Down ( ) keys to move the highlight
to the color you want to change, and then press the Enter key ( ). Use the Scroll Up ( ) or Scroll
Down ( ) keys with the percentage number selected to change that particular color’s intensity. You
can also switch the background color to the foreground color by changing the Inverse Background to