DSM250 User’s Manual
Page 28 Revision 1.4.16a
Figure 12 – Device Selection Screen
The “NA” column of the menu displays the node address the device is using.
The “Manufacturer” column of the menu displays the manufacturer of the device.
The “Model” column displays the model number of the device.
The “SN#” column displays the serial number of the device, so that any of two or more devices of
the same manufacturer and model number may be distinguished from one another.
The “Status” column indicates whether the device is currently connected to the bus and is
responding to queries (“Online”), or has been disconnected from the bus, has lost power, or for
some other reason is not responding to queries (“Offline”).
The “Display” column indicates whether data from that particular device is accepted for display by
the DSM250 (“On”) or that the DSM250 ignores data transmitted by this device (“Off”). By
scrolling to the device and pressing the Enter key ( ), you may then use the Scroll Up ( )
and Scroll Down ( ) keys to toggle the “Display” status for this particular device. Once you
are satisfied with the state of the “Display” setting, press the Enter key ( ) to accept the
setting.
The DSM250 will retain information on devices that have been removed from the bus or powered
down (“Offline”) so that when they are placed back on the bus, they will assume their prior “Display”
setting.
