Filter
Top Products
TOUNLOCK/MOVETHERAILS
See Figure 15.
The front and backrails will needto be positionedsothey
do not touch thefloor when the Sagstand isclosed.
Usingthe bottomscaleas a guide,the scalewill need to
bealigned to the saw blade at the 14 in.mark.To unlock
and move t_e mils:
• Loosenthe front rali clampsby pushingthe levertothe
left.
• Slidethe ra'dto the desired position.
• Securethe ragin positionbypushingthe clampto the
right.
• Repeatshove steps with therear railplscingit inthe
same locationas thefrontrail.
NOTI:-'Whenthe rails are moved tothe right,usecaution
toavoid trippingon the front legbrace.
RELEASE
LEVER
IL
CLAMP
_g. 15
TO CLOSE THE LEG STAND AND MOVE THE SAW
See Figure16.
Store theslidingmiter table on the back ofthesaw
cabinet. See To Store the Tab/eSaw A_ssories on the
previouspage. Next, set the frontand back ransto14 in.
as describedabove.
NOTE: Never closethe legstand orattempt to movethe
table saw untilboththe above stepsare complsted.
To cfoae the leg stand:.
• At the same time, step onthe releaselever,graspthe
grips,and t_ the handlesop and away fromthe body.
• Push the table saw untilthe releaseleverclicksand
locks intoplace.
To moYa the |eg s_and;
• Holdingthegripsfirmly,pu(tthe handlestoward
you untUthe lag stand and saw are balanced on the
wheels.
• Push thesaw to the desiredlocationthen eitheropen
the lag standfor immediatesaw operationor storethe
saw in a dry environTnent.
NOTE: Never movethe table saw unlesstheslidingmiter
table issecurely stored.
Fig.16
TO REMOVE / REPLACE THE THROAT PLATE
,..%eFigure 1.7,
• Raisetheblade 2 in.above the saw table.
• Loosentha screwsinthe throat prate.
• Liftthe throatplate from the saw,
• Toreinstallthe threatplate,af(gn theholesin the throat
platewiththe holesin the saw table.
• Ratightenthe screws, beingcarefulnot to overt_ghtan,
which can causethethroat plate tobow or bend.
19
Fig.17