Filter
Top Products
I PROBLEM CAUSE SOLUTION !
Wood edges away fromrip Ripfence is misaligned. Check and adjustthe ripfence.
fencewhen ripping. Blade not properlyeh,_rpenedor Reeharpenor set blade.
set,
Slidingmiter table aSSembly Miterbase orslidesimproperly See page 26 for adjustments tosliding
does not movesmoothly, adjusted, miter table assembLy.
Saw does not make accurate 90 Posltlvestops insidecabinetneed Adjustpositivestops.
or 45 degree cuts. adiusting(BevelCuts):
Miter gaugeismisaligned(Miter Adjustthe mitergauge.
Cuts).
Blade adjustinghandleis hard Gears or ScrewPost inside Clean thegears or screwpoet.
to turn, cabinetare ckiggsd with
dust.
Saw does notstart. Motor cordor wall cord isnot Plugin motor cordor wall cord.
pluggedin.
Cirouitfuse isblown.
Circuitbreakeristripped.
Cordor switch isdamaged.
Replace circu'_fuse.
Resetcircuitbreaker.
Have the cordor switchreplacedat your
SearsServiceCenter/Department.
Blade makes poor cuts.
Bladeisdull ordirty.
Blade is wrongtypefor cutbeing
made.
Bladeismounted backwards.
Clean, sharpen,or replaceblade.
Replacewith correcttype.
Remountblade.
Bladedoes not lowerwhen
turning bladeadjustinghandle.
Backside of rivingknifehas
comein contact wff.hsaw table.
Lockinglever is notat full left
position.
Realignand adjusttherivingknife.
Move _ockingleverto left.
Motor taborsinrip cut,
BJadenotproper for ripcut. Change blade; rip blade typicallyhas fewer
teeth.
47