Filter
Top Products
UNPACKING
Thisproduct requiresassembly.
• Carefullyliftthe asw from the cartonand place iton a
level work surface.
NOTE=This tool is heavy.To avoidback injury,keep
yourknees bent and liftwithyourlegs, notyourback,
and do not liftsaw without help.
• Inspect the tool carefullyto make sure no breakageor
darnags occurredduringshipping.
• Do not discardthe packingmaterial untilyou have
caref_Jttyinspected and sstistacto_tyoperated the too_.
• The _aw isfactory setfar accurate cutt'_ng.After
assemblingit, checkfor accuracy.If shippinghas
influenced _e settings,referto specificprocedures
expta'medin _is manual.
• If any parts aredamaged or missing, plasea call
1-800-932-3188 for ass]stance.
_" WARNING: if anyparts are missing,do not operate
th_stoo_unt_the missing parts are replaced.Failure
to do so could rssultin possibleseriouspersonal
injury.
_1= WARNING: Do not attempt to modify this tool
or create accessories not recommendedfor use
with this tool. Anysuch aiteratlonor modification is
misuseand could resultin a hazardouscondition
leading to possible se_oL;spersonalin)ury.
A WARNING: Do not connectto power supplyuntil
assembly is complete. Fa(lursto comply couldresult
in accidentalstarting and possibleseriouspersonal
injury.
_1= WARNING: Do not liftthe saw without help. Hold
it close to your body.Keep yourkneesbent and
(iftwith yourlegs, not yourback. Ignoringthese
precautionscan resultin back injury.
• Step on the release]everand pull the gripstoward you
at the sametime.
• Once the leg stand is released from the release lever,
easethe leg s_n rttoward the _ocr by pashlngth_ grips
toward the floor.
• Withyourhandsonthegr_ps,pushthslegstand_owards
the ground untilthe _.bis saw isin an uprightpos'_tion.
NOTE: The releaseleverwillclose overthe centerbrace
lockingthe legstand in an uprightposlton.
GRIPS SAW
BASE
RELEASE LEG,STAND
LEVER
Fig. 7
A
Am, WARNING: Never stand d}rs_')yinlinewith the
blade or allow handsto cornscloser than 3 in.to the
blade. Do not reach over or across the blade. Failure
to heed this warning canresultin seriouspersonal
iniury.
A
me, WARNING" Toavoid seriouspersonalinjury, always
make sure the table saw is securelymountedto
this leg stand. NEVERremove the saw from the 1eg
stand.
TO OPEN THE LEG STAND
See Figures7- 8.
• Grasp the gripson the saw table and s_andituprightas
shown infigure 7 be(ow.
cENTER
BRACE
Fig,8
16