Filter
Top Products
INSTALLT-NUTSFROMREAROFRIPFENCE
T-NUT
Fig.53
TOINSTALLGUIDEFENCEBRACKETS
See F/gum 54.
• To install the guidefence brackets, align each bracket
with two ofthe T-nutson top of the ripfence.
NOTE=Usathe hnt twoT-nuts and the backtwo
T-nutsleavingthe one inthe middle empty.
• Securethe guide fence brackets to the rip fence with
5/16 in. washersand the5/16 in.x 1/2 in.knob bolts.
TO INSTALL POST, GUARD/DUST COVER WITH
PIVOT ASSEMBLY
See F/gum54.
The guard/dust cover must be used in all routing opera-
tions.
• Placethe spaceron the threaded end ofthe post and
threadthe post intotheremaining"i-nut.
• Tightsnthe postsecurelywith an ad.iustab|ewrenchon
the fiatson the top of the post.
• Planethe guard/dustcoverwith pivotassemblyon the
pesL
• "Theassemblywillslideup and downon the post as
needed. Scoursat the desired location by tightening
the knobnut attached to the carriagebolt.
GUARD)DUSTCOVERWITH
P|VO_ASEMBLY
KNOB
FLAT8ON
KNOB
BOLTS
5/tll i.
WASHERS
CARRIAGEBOLT
GUIDEFENCE
BRACKET
T-NUTS
SPACER
RIPFENCE
Fig. 54.
38