Filter
Top Products
SAFETY SUMMARY
S - 12
ETC00781(4) Series 100 e 02/2004
X
The analyzer housings must be provided with a permanent type plate indicating the name
of the manufacturer, model number, serial number, and the following reference and date
of testing:
"IBS/PFG-Nr. 41300392" (for CH
4
, CO
2
or CO)
"IBS/PFG-Nr. 41300292" (for O
2
)
Other designation requirements, such as these according to ElexV, are still valid. With
this type plate, the manufacturer conformes that the features and technical data of the
delivered system are identical with those described in this report. Any system which is not
provided with such a type plate does not go conform with this report.
X
The chapter 6 of this report must be included in the operation and maintenance manual.
X
The manufacturer has to supply the customer with a copy of this report, if required.
X
A print of the report in an abridged version requires the agreement of PFG.
X
The results included in this report may not be altered in publications produced by the
manufacturer.
OPERATING CONDITIONS ACCORDING TO DMT APPROVAL