Filter
Top Products
P - 3
PREFACE
ETC00781(4) Series 100 e 02/2004
Area Classification
a) General Purpose
All analyzer components are installed into a 1/4 19" housing (BINOS
®
100 (M), OXYNOS
®
100,
HYDROS
®
100) or a 1/2 19" enclosure (BINOS
®
100 2M), 3 height units. These housings are go
conform to DIN-standard protection class IP 20. The housings are available as rack-mountable
or as table-top versions. The table-top housings are fitted with an additional carrying handle and
additional rubber feets.
Additionally we can deliver a field housing version (BINOS
®
100 F). All componets are installed
into a protection housing conforming to DIN-standard protection class IP 65 (approx. NEMA 4/4X).
This enclosure is designed for wall mounting.
b) Hazardous Areas
For installation in hazardous areas special versions of BINOS
®
100 F are avaliable with
adapted options and specifications. These versions are not subject of this manual (except the
variation with Z-purge). For all other analyzer versions intended to be used in hazardous areas
pls. refer to the separate manuals.
Ex Zone 2
The BINOS
®
100 F is equipped with
- Pressurization system for ATEX EX Zone 2 Applications
- Z purge for CSA-C/US EX Zone 2 Non-Flammable Atmospheres
Ex Zone 1
The BINOS
®
100 F is equipped with
- Pressurization system for ATEX EX Zone 1 Applications