Filter
Top Products
12
If all fuel flows configured (Configuration name unavailable):
1. Press MENU, use the UP and DOWN keys to select SYSTEM SETUP and
press
MENU.
2. Highlight
B. DEVICES and press MENU. The Bus Devices list will
appear.
3. Select the Port FFlow and press
MENU.
4. Highlight
UNSET ENGINE and press MENU. The following message will
appear: Hit Menu to Unset Dev Name.
5. Press
MENU and you will be taken back to the Bus Devices menu,
where fuel flow (formerly Port FFlow) now will be displayed as UnCfg
FFlow.
Remember: If the fuel flow you just unconfigured is not shown on the
Bus Devices the list, you will have to refresh the list. Let the Bus Devices
list time out then access it again.
6. Highlight
STBD FFLOW and press MENU. Select CHANGE ENGINE and press
MENU, which will open the Select Engine menu with up to three
options: Port, Cen, Stbd.
7. Highlight
PORT and press MENU.
8. You will be taken back to the Bus Devices list, where the fuel flow
you selected (formerly Stbd FFlow) will now be shown as Port FFlow. If
the newly configured fuel flow is not shown, refresh the Bus Devices
list.
9. Now, select
UNCFG FFLOW and press MENU. The following message will
appear: Hit Menu to Cfg Flow Sns.
10. Press
MENU, which will open the Select Engine menu. Highlight
Starboard and press
MENU. You will be directed to the Bus Devices list
where the fuel flow now will be displayed as Stbd FFlow. If the newly
configured fuel flow is not shown, refresh the Bus Devices list.
If configuration name available:
1. Press MENU, use the UP and DOWN keys to select SYSTEM SETUP and
press
MENU.
2. Highlight
B. DEVICES and press MENU. After a few moments, the Bus
Devices list will appear.
3. Highlight
PORT FFLOW and press MENU. Select CHANGE ENGINE and press
MENU, which will open the Select Engine menu with up to three
options: Port, Cen, Stbd.
4. Highlight
STARBOARD and press MENU.