Filter
Top Products
37
EP-60R Fuel Flow Configuration
When configuring your fuel flow, you will open its Device Configuration
menu where you can access the Location and Advanced Options menu.
You can also change your fuel flow's device name.
Device Name
You can change how your fuel flow will be displayed on your unit's
NMEA 2000 Devices list by inputting a customized device name in the
Device Name dialog box.
NOTE:
Changing the Device Name only will affect the way the EP-60R is
shown on your display unit. The customized device name will not
be seen by other devices or display units on the NMEA 2000
network.
To change Device Name:
1. Press MENU twice, select NMEA 2000 or NETWORKING and press ENTER.
2. Highlight
BUS SETUP and press ENTER. Select the desired fuel flow
from the Bus Devices list and press
ENTER.
3. Device Name will be highlighted. Press
ENTER to access the Device
Name dialog box.
4. Use the
UP and DOWN keys to change the Device Name. When you
have finished inputting the desired Device Name, press
ENTER. Press
EXIT repeatedly to return to the main display.
To reset device name to default setting:
1. Press MENU twice, select NMEA 2000 or NETWORKING and press ENTER. A
menu will appear with five options: Bus Setup, Fuel Management,
NMEA 2000 Alarms, Waypoint Sharing and Backlight
Synchronization.
2. Highlight
BUS SETUP and press ENTER, which will open the Bus
Configuration menu. A list of network devices will be at the top of the
page.
3. Select the fuel flow with the device name you want to reset and press
ENTER. The Device Configuration menu will appear with the Device
Name dialog box highlighted.
4. Press
ENTER. Depress the left arrow key until the device name
disappears. Press
ENTER, then press EXIT to return to the NMEA 2000
menu.