Filter
Top Products
34
Bus Setup highlighted on the NMEA 2000 menu (left). Bus Setup
selected on Networking menu (right).
The Engine-Tank Configuration and Tank Select menus as well as the
Tank Size dialog box are located on the bottom half of the Bus
Configuration menu. The Set Configuration button — positioned next
to the engine-tank configuration menu — allows you to finalize a
selected configuration.
Bus Configuration menu (left). NMEA Diagnostics page (center).
Ethernet Diagnostics (right).
The NMEA Diagnostics page displays information about the
performance of the network bus, keeping you updated on bus status,
mode, errors and bus traffic. The Ethernet Diagnostics page keeps you
updated on the performance of an Ethernet connection (if applicable)
supplying information ranging from IP Address to upload and
download rates (bytes per second). To refresh either Diagnostics page,
highlight the
PING ALL DEVICES button at the bottom of the page and press
ENT.
Engine & Tank Configuration
The Engine-Tank configuration menu is located below the NMEA 2000
Devices list, but will only be accessible if a fuel-related sensor is on the
network.