Filter
Top Products
36
menu. To configure or calibrate most devices, you will select it on the
NMEA 2000 Devices list and press
ENTER. This will open its Device
Configuration menu.
Bus Configuration menu with five items displayed on the NMEA 2000
Devices list. Engine-Tank Configuration and Tank Select menus are at
the bottom of the screen.
Device Configuration Menu
When a device is selected from the network devices list on the Bus
Configuration menu, its Device Configuration menu will appear. Device
configuration menus vary among devices. Available functions on device
configuration menus allow you to change device names, tank sizes,
fluid types and provide access to the Advanced Options menu. We will
cover configuration and calibration later in this section.
Device Information and Device Data
The Device information panel, located to the left of the Device
Configuration menu, displays information on the selected device that
includes, software version, model, address, serial number, instance and
current status.
Device Data is shown in the Device Data window at the bottom of the
device configuration menu. The information displayed in the Device
Data window will vary among devices. If, for example, you are viewing
the device configuration menu for an EP-65R Fluid Level, the device
data window will include tank size and the amount of fuel left in the
tank.
The Device Data for an EP-60R Fuel Flow includes Fuel Rate (amount
of fuel burned per hour), Fuel Used, Trip Fuel Used and Seasonal Fuel
Used.