Filter
Top Products
43
Displaying data from fuel flow
The Overlay Data function will be used to show EP-60R Fuel Flow data
on your unit's main display.
To add overlay data from the EP-60R:
1. Press MENU, highlight OVERLAY DATA and press ENTER.
2. Select
(PRESS ENT TO ADD…) and press ENTER.
3. Highlight
NMEA 2000 and press ENTER. A list of devices on the
network will appear.
4. Select the desired fuel flow and press
ENTER. Fuel Rate, Fuel Used,
Trip Fuel Used and Seasonal Fuel Used categories will appear.
5. Highlight the data you want to display and press
ENTER, which will
place a checkmark in its enabled box. It now will be shown as overlay
data on your unit's main display.
6. Repeat step 5 to display another data category, or press
EXIT
repeatedly to return to the main display.
NMEA 2000 Alarms
The NMEA 2000 Alarms menu allows you to set Full and Empty fuel
alarms for a number of NMEA 2000 devices. The alarms may be set to
a percentage (0-100%) of tank capacity.
To turn on/off NMEA 2000 Alarm:
1. Press MENU twice, select NMEA 2000 or NETWORKING and press ENTER.
2. Highlight
NMEA 2000 ALARMS and press ENTER.
3. Highlight
FLUID LEVEL DEVICE and press ENTER. Select the desired fuel
flow and press
ENTER.
4. Highlight the
ENABLED box next to the desired alarm (Full Alarm or
Empty Alarm) and press
ENTER to turn on the alarm. When the alarm
is on an "X" will be placed in the Enabled Box.
5. To set the alarm percentage, highlight
PERCENT and press ENT.
6. Use the arrow keys to input the desired percentage and press
ENTER.
Repeat Steps 3-4 to set the other alarm.
7. Highlight
SET CONFIGURATION and press ENTER to finalize alarm
settings. Press
EXIT repeatedly to get back to the main display.
NOTE:
To turn off (uncheck) an alarm, select its
ENABLED BOX and press
ENTER. Highlight the SET CONFIGURATION button and press ENTER.