Filter
Top Products
9
LMF-200: EP-60R
Configuration & Calibration
This section covers how to use the EP-60R Fuel Flow with a LMF-200
Multi-function gauge.
NOTE:
You will notice the LMF-200 does not have an Exit key. Menus will
time out after a preset amount of time (3, 5, 10 or 15 seconds). The
default setting is 5 seconds. Refer to your LMF-200 instruction
manual for more information on the Timeout feature.
LMF-200 Multi-function Digital Gauge
Boat Setup
If this is the first time you have turned on your LMF-200, you will have
to complete Boat Setup before you will be able to configure or calibrate
your fuel flow. If you have already completed Boat Setup, skip ahead to
the segment covering EP-60R Fuel Flow Configuration.
To execute Boat Setup:
1. With Boat Setup highlighted on the screen, press MENU. The Boat
Setup menu will appear, allowing you to select an engine-tank
configuration to match the number of engines and fuel tanks on your
vessel. Boat Setup options include: 1 En/1 Tk, 1 En/2 Tk, 2 En/1 Tk, 2
En/2 Tk, 3 En/1 Tk and 3 En/3 Tk.
2. Select the correct configuration option and press
MENU. If you
selected a configuration with more than one tank, the Tank Size menu
will appear. (If you selected a single tank configuration you will be
taken directly to the Tank Size window, where you can input the size of
the tank.)