Filter
Top Products
24
flow to free up its configuration name. If all three fuel flows are
configured, which means there is no configuration name available,
follow the first set of instructions. If the desired configuration name is
available, follow the second set of instructions.
Change Engine (active only with multiple-engine setting)
The steps below show how to switch the configuration name of a fuel
flow from Port engine to Starboard engine.
If all fuel flows configured (Configuration name unavailable):
1. Press MENU, use the UP and DOWN keys to select SYSTEM SETUP and
press
ENTER.
2. Highlight
BUS DEVICES and press ENTER. The Bus Devices list will
appear.
3. Select the Port fuel flow and press
ENTER. Highlight UNSET ENGINE and
press
ENTER. The following message will appear: Press Enter to
UnConfig Device Name.
4. Press
ENTER. You will be taken back to the Bus Devices list, where
the Port fuel flow will now be displayed as UnCfg FFlow.
5. Select the Starboard fuel flow and press
ENTER.
6. Highlight
CHANGE ENGINE and press ENTER. The Select Engine menu
will appear.
7. Select
PORT and press ENTER. You will be taken back to the Bus
Devices list.
8. Highlight UnCfg FFlow and press
ENTER. The following message will
appear: Press Enter to Configure Fuel Flow Sns.
9. Press
ENTER, which will open the Select Engine menu. Choose
Starboard and press
ENTER. You will be taken back to the Bus Devices
list where both fuel flows will be shown with their new configuration
names.
If desired configuration name available:
1. Press MENU, use the UP and DOWN keys to select SYSTEM SETUP and
press
ENTER.
2. Highlight
BUS DEVICES and press ENTER. The Bus Devices list will
appear.
3. Select the fuel flow you want to reconfigure and press
ENTER.
Highlight
CHANGE ENGINE and press ENTER. The Select Engine menu will
appear.
4. Choose the desired configuration name and press
ENTER. You will be
taken back to the Bus Devices list, where the fuel flow you reconfigured
will be displayed with its new configuration name.