Filter
Top Products
17
To Reset Trip Fuel (Rst trip f)
1. Press MENU, use the UP and DOWN keys to select SYSTEM SETUP and
press
MENU. Highlight FUEL MNGR and press MENU.
2. Select
RST TRIP F (Reset Trip Fuel) and press MENU. The Select Engine
menu will appear with up to four options. Select the desired engine or
All Engines and press
MENU. (If you are using a single-engine
configuration you will not see the Select Engine menu.)
3. The following message will appear: Hit Menu to Rst Trip F. Press
MENU, which will reset the trip fuel used to zero.
Reset Seasonal Fuel (Rst Seas)
The LMF-200 uses fuel flow data to keep a running total of fuel used
for a season. By using the Reset Seasonal command, you can reset to
zero the running total of fuel used for a season.
To reset seasonal fuel:
1. Press MENU, use the UP and DOWN keys to select SYSTEM SETUP and
press
MENU. Highlight FUEL MNGR and press MENU.
2. Choose
RST SEAS and press MENU. If you have more than one engine,
the Select Engine menu will appear with up to four options.
3. Select the desired engine or All Engines and press
MENU. The
following message will appear: Hit Menu to Rst USD:S.
3. Press
MENU, which will take you back to the main display.
Fuel Warning
The Fuel Warning feature allows you to set a Low level or High level
alarm for each fuel tank. A pop-up window will appear and an alarm
will sound if the amount of fuel rises above (High Level) or falls below
(Low level) the selected percentage of tank capacity.
To set a fuel warning:
1. Press MENU, select SYSTEM SETUP and press MENU.
2. Highlight
BUS DEVICES and press MENU to display the Bus Devices list.
Select the desired Fuel Flow (FFlow) and press
MENU. The
Configuration Options menu will appear.
3. Select
FUEL WARNING (Fuel Wrng) and press MENU.
4. The Select Level menu will appear with two options: High Level and
Low Level.
5. Select the desired level and press
MENU. The Level Percentage
window will appear. It will be set to Off by default.