Filter
Top Products
P 13/ 30
Repair
[3] DISASSEMBLY/ASSEMBLY
DISASSEMBLING
[3] -7. Table Section (cont.)
Fig. 33
Fig. 34
6) Now the Table section can be removed from Guide fence
by unscrewing nine M6x20 Hex socket head bolts from
the back side of Table complete. (Fig. 32)
7) Remove Hex socket head bolt M8x50 and Flat washer 8
from each end of Guide fence. (Fig. 33)
8) Insert a slotted screwdriver into the hole of Sleeve 8
on each end of guide fence, and lever it out from the hole
of Frame as illustrated to left in Fig. 34.
Note:
Hold Guide fence by hand to prevent from falling down.
Now Guide fence can be separated from Frame
as illustrated to right in Fig. 34.
Fig. 32
[Table section turned over]
Table complete
Hex socket head bolt M8x50
Flat washer 8
Frame
Guide fence
Slotted screwdriver
Sleeve 8
Guide fence