Filter
Top Products
P 18/ 30
Repair
[3] DISASSEMBLY/ASSEMBLY
[3] -9. Assembling Feet Section (cont.)
Fig. 48
4) To Square pipe 32-510, assemble Hook and Foot. And to Square pipe 32-475, assemble Stopper hook and Foot nut.
(Fig. 48)
LEFT FEET SECTION
Stopper hook
Hook
Square pipe 32-510
Hex nut M6
Foot
Foot
Foot bolt
Compression spring 13
Foot nut
Foot nut
Square pipe 32-475
Stopper hook
Pin 8 (long)
Pin 8 (short)
Foot
Support bracket
Fig. 49
Note: Different from the Left feet section, two 32-475 Square pipes are used for the right Feet section.
1) The same way as you did in assembling the left feet section;
Assemble Support bracket to Square pipes precisely at an angle of 90 degrees. (Fig. 45, 46)
Then assemble Bracket and Pin 8 to each Square pipe. (Fig. 47, 48)
2) Assemble Stopper hook to the Square pipe 32-475 on the side of operator's position. (Fig. 49)
3) Mount Foot to each Square pipe. (Fig. 49)
RIGHT FEET SECTION
Support bracket
Hex nut M6
Foot
Pin 8 (long)
Bracket