Filter
Top Products
P 6 / 30
Repair
[3] DISASSEMBLY/ASSEMBLY
DISASSEMBLING
ASSEMBLING
[3] -2. Switch Box (On/Off Switch Section)
Do the reverse of the disassembling steps.
Fig. 10
Fig. 9
1) First, disconnect the right hinge of Switch cover from Switch box using slotted screwdriver. (Fig. 9)
2) Then, while lifting up the right hinge, pull off the left hinge from Switch cover. (Fig. 10)
3) Remove Torsion spring 5 from the left hinge.
Switch box is located below Table on Frame complete. (Fig. 8)
Right hinge
Left hinge
Torsion spring 5
Switch cover
Switch box
Slotted screwdriver
Switch button "ON"
Switch button "OFF"
Right hinge
Fig. 8
Switch button "ON"
Switch button "OFF"
Torsion spring 5
Switch cover
Switch box
Frame complete
left hinge
right hinge
Switch box
[Large view]