Filter
Top Products
Appendix 6 Instruction Manual for Compliance with UL/c-UL
MITSUBISHI CNC
Appendix 6 - 4
Appendix 6-2-5 Field Wiring Reference Table for Input and Output (Power Wiring)
Use the UL-approved Round Crimping Terminals to wire the input and output terminals of MDS-D/DH
Series. Crimp the terminals with the crimping tool recommended by the terminal manufacturer. Please
protect terminal ring by the insulation cover.
Following described crimping terminals and tools type are examples of Japan Solderless Terminal Mfg. Co.,
Ltd.
This wire size is each unit maximum rating. The selection method is indicated in each specification manual.
(See Manual: No. IB-1500003, 1500011, 1500158, 1500875 or 1500891)
(1) Power Supply Unit (MDS-D/DH-CV)
TE2 (L+, L-)
TE3 (L11, L21)
TE1 (L1, L2, L3, )
(Note) 75 °C:Grade heat-resistant polyvinyl chloride insulated wires (HIV).
Use copper wire only.
Above listed wire are for use in the electric cabinet on machine or equipment.
Unit Type
MDS-D-CV- 37 to 75 110 to 185 300 to 450 550
MDS-DH-CV- ------ 37 to 185 300 to 750 --- ---
Terminal
Screw
Size
TE2 (L+, L-)
Torque [lb in/ N m]
M6 M6 M6 M6 M10
35.4/4.0 <- <- <- 97.3/11.0
TE3 (L11, L21)
Torque [lb in/ N m]
M4 M4 M4 M4 ---
10.6/1.2 <- <- <- ---
TE1 (L1, L2, L3, )
Torque [lb in/ N m]
M4 M5 M8 M10 ---
10.6/1.2 17.7/2.0 53.1/6.0 97.3/11.0 ---
Unit Type
MDS-D-CV- --- 37 75 110 185 --- 300 to 550
MDS-DH-CV- 37, 75 --- 110 185 300, 370 450 550, 750
Wire Size (AWG)
/Temp Rating
Note 1
#14
/75°C
#12
/75°C
#10
/75°C
#8
/75°C
#4
/75°C
#3
/75°C
Bus-bar.
Crimping Terminals Type R2-6 R5.5-6 R5.5-6 R8-6 R22-6 R38-6 ---
Crimping Tools Type YHT-2210 <- <- YPT-60-21 <- YPT-60-21 ---
Unit Type MDS-D/DH-CV- 37 to 750
Wire Size (AWG)
/Temp Rating
Note 1
#14
/75°C
Crimping Terminals Type R2-4
Crimping Tools Type YHT-2210
Unit Type
MDS-D-CV- 37 --- 75 110 185
MDS-DH-CV- 37, 75 110 --- 185 ---
Wire Size (AWG)
/Temp Rating
Note 1
#14
/75°C
#12
/75°C
#10
/75°C
#8
/75°C
#6
/75°C
Crimping Terminals Type R2-4 R5.5-5 5.5-S4 R8-5 R14-5
Crimping Tools Type YHT-2210 <- <- YPT-60-21 <-
Unit Type
MDS-D-CV- --- --- 300 370, 450 550
MDS-DH-CV- 300 370, 450 550 750 ---
Wire Size (AWG)
/Temp Rating
Note 1
#6
/75°C
#4
/75°C
#2
/75°C
#1/0
/75°C
#3/0
/75°C
Crimping Terminals Type
Crimping Tools Type
R14-8 R22-8 38-S8 60-S8 80-10
YPT-60-21 <- <- <- YPT-150-1