Filter
Top Products
2 Specifications
MITSUBISHI CNC
2 - 16
2-3 Tool spindle motor
2-3-1 Specifications
< HF-KP Series >
(Note) The above characteristics values are representative values. The maximum current and maximum
torque are the values when combined with the drive unit.
Tool spindle motor type
HF-KP Series
HF-KP □-W09
HF-KP46 HF-KP56 HF-KP96
Compatible spindle
drive unit type
MDS-D-SPJ3- 075NA 075NA 075NA
Continuous charac-
teristics
Rated output [kW] 0.4 0.5 0.9
Rated current [A] 1.5 1.8 3.6
Rated torque [N•m] 0.64 0.80 1.43
Power facility capacity [kVA] 0.9 1.1 1.8
Rated rotation speed [r/min] 6000
Maximum rotation speed [r/min] 6000
Maximum current [A] 5.5 11.3 15.5
Maximum torque [N•m] 2.5 5.0 6.5
Motor inertia [kg•cm
2
]
0.24 0.42 1.43
Motor side detector
Resolution per motor revolution
W09:262,144 pulse/rev
Degree of protection IP67 (The shaft-through portion is excluded.)
Environment
Ambient temperature
Operation: 0 to 40℃ (with no freezing),
Storage: -15℃ to 70 ℃ (with no freezing)
Ambient humidity
Operation: 80%RH or less (with no dew condensation),
Storage: 90%RH or less (with no dew condensation)
Atmosphere Indoors (no direct sunlight); no corrosive gas, inflammable gas, oil mist, or dust
Altitude
Operation: 1000 meters or less above sea level,
Storage: 10000 meters or less above sea level
Vibration
X,Y: 49m/s
2
(5G)
Flange size [mm] 60 SQ. 60 SQ. 80 SQ.
Total length (excluding shaft) [mm] 118.7 140.6 149.1
Flange fitting diameter [mm] φ50 φ50 φ70
Shaft diameter [mm] φ14 φ14 φ19
Mass [kg] 1.2 1.7 2.9
Heat-resistant class Class B (130°C)
For outline dimension drawings, refer to "DRIVE SYSTEM DATA BOOK" (IB-1500273(ENG)).