Filter
Top Products
Appendix 6 Instruction Manual for Compliance with UL/c-UL
MITSUBISHI CNC
Appendix 6 - 8
Appendix 6-2-8 Spindle Drive/Motor Combinations
Following combinations are the Standard combinations
(Note) Applicable unit depends on the range of power constant of motor.Inquire of Mitsubishi
about the detail of the combinations.
Drive Unit
Rating Output (kW) of Applicable Spindle Motor
SJ, SJ-V/VL Series
Note: 1
MDS-D-SP(#)-20 0.75
MDS-D-SP(#)-40 0.75, 1.5, 2.2
MDS-D-SP(#)-80 2.2, 3.7, 7.5
MDS-D-SP(#)-160 7.5, 11
MDS-D-SP(#)-200 11, 15, 18.5
MDS-D-SP(#)-240 18.5, 22
MDS-D-SP(#)-320 22, 26, 30
MDS-D-SP(#)-400 30, 37, 45
MDS-D-SP(#)-640 37, 45, 55
MDS-D-SP2(#)-2020 0.75, 1.5 / 0.75, 1.5
MDS-D-SP2(#)-8040 2.2, 3.7, 7.5 / 0.75, 1.5, 2.2
MDS-D-SP2(#)-8080 2.2, 3.7, 7.5 / 2.2, 3.7, 7.5
MDS-D-SP2(#)-16080 7.5, 11 / 2.2, 3.7, 7.5
Drive Unit
Rating Output (kW) of Applicable Spindle Motor
SJ-4, SJ-4-V/VL Series
Note: 1
MDS-DH-SP(#)-20 0.75, 1.5, 2.2, 3.7
MDS-DH-SP(#)-40 2.2, 3.7, 5.5, 7.5
MDS-DH-SP(#)-80 2.2, 3.7, 7.5, 11
MDS-DH-SP(#)-100 7.5, 11, 15, 18.5
MDS-DH-SP(#)-160 18.5, 22, 26, 30
MDS-DH-SP(#)-200 26, 30, 37, 45
MDS-DH-SP(#)-320 30, 37, 45, 55
MDS-DH-SP(#)-480 45, 55, 60
MDS-D-SP2(#)-2020 0.75, 1.5, 2.2, 3.7 / 0.75, 1.5, 2.2, 3.7
MDS-D-SP2(#)-4040 2.2, 3.7, 5.5, 7.5 / 2.2, 3.7, 5.5, 7.5
MDS-D-SP2(#)-8040 2.2, 3.7, 7.5, 11 / 2.2, 3.7, 5.5, 7.5
Drive Unit
Spindle Motor
SJ-V
SJ-VL
MDS-D-SPJ3(#)-075(##) - SJ-VL0.75
MDS-D-SPJ3(#)-22(##) SJ-V2.2 SJ-VL1.5, SJ-VL2.2
MDS-D-SPJ3(#)-37(##) SJ-V3.7 -
MDS-D-SPJ3(#)-55(##) SJ-V5.5 -
MDS-D-SPJ3(#)-75(##) SJ-V7.5 -
MDS-D-SPJ3(#)-110(##) SJ-V11 -